Stage Manual
Congratulations on purchasing the scent machine! There is no more powerful or refined scent machine. Let us go through the instructions.
1. Preparation
A blue cartridge bottle is supplied with the machine. Fill the bottle, which may be filled completely, and click it into the holder. The fragrance oil is intended to be used pure, without adding water. Then connect the hose to the horizontal tube on the cartridge, as shown in the photo.
2. Switching on
Connect the machine to the mains using the supplied cable. The red indicator will light up. You can now switch on the machine using the on/off button on the back, and the green indicator will light up. The scent machine will start operating immediately.
3. Configuration
Pump
The machine contains two cartridges, whose fragrance intensity can be configured independently. This is controlled by the pump, which can be set to level 1 or level 2. Level 1 is low intensity and level 2 is high intensity. You can therefore run one pump gently, both gently, both strongly, or one strongly and one gently. This gives you very precise control.
Blower
This very powerful fan can be configured separately. It determines how far the scent is dispersed. Adjust it based on the size of the space or the coverage area you require.
Please note: we always recommend starting at the lower setting. You can then decide whether a stronger setting is required.
4. Automatic switch-off?
These machines do not have a built-in switch-off programme. It is therefore important to switch the machine on and off as needed. To have it switch on and off at specific times, simply use a digital timer switch. We can also supply one. Let us know if you would like this.
