Smart Display Manual

{Please note: if you are prompted to enter a password, the password is: 0000}

Getting started:
An important first step is to remove the black cap from the suction tube or hose located at the bottom of the cartridge or bottle. This prevents obstruction of the diffusion process.

Setting the time:
1. Press the ▲ and ► buttons at the same time
2. The time will start flashing. Use the ▲ button to adjust the time and ► to move to the next setting
3. Once everything is set correctly, press Enter to finish

Setting specific on and off times for each day:
4. Press ► to open the settings menu
5. The day will start flashing. Press ▲ to change it
6. Once the correct day is selected, press Enter. The start time for the machine will then flash
7. Use ▲ to set the time and ► to move to the next setting
8. The first time is when the machine switches on. The second time is when it switches off

Setting the scent intensity:
9. Use ► to navigate to W. W determines how long the machine releases scent during each cycle. Set this with the ▲ button, starting with W/10
10. Use ► to navigate to P. P determines the interval between each scent release. Set this with the ▲ button, starting with P/100
11. Example: W/10s P/100s means the machine remains idle for 100 seconds and then runs for 10 seconds. Test the settings to find a suitable scent intensity for your space.

Save after every change:
12. After changing a day, always press Enter to finish. Otherwise, the changes will not be saved

Resetting the scent machine:
13. To reset the machine:
14. Press and hold the Back button and ► at the same time. Use ► to select Yes and press Enter